2N IP Verso - Bluetooth Reader; Touch Display

Installation manual 2N® IP Verso
194 / 241
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Bluetooth Reader
The Bluetooth reader (Part No. 9155046) is one of the2N
®
IP Versointercom elements
and helps authenticate and subsequently open doors using Android and iOS based
smartphones via the Bluetooth protocol 4.0 as RFID card replacement. Install
the2N
®
Mobile Keyapplication fromGoogle PlayandAppstoreto make authentication
work properly. The application requires phones with Android OS 6 and higher and iOS 12
and higher.
The module contains two2N
®
IP Versobus connectors.
The two connectors are fully interchangeable and can be used both as inputs from the
main unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The package includes a 220 mm long interconnecting cable.
The module uses the 2.4 GHz frequency.
IDs from the following smart phones can be read:
Android 6 and higher
iOS 12and higher
Touch Display
TheTouch display(Part No.9155036) is designed for the2N
®
IP Versocommunicator. This
module can be used as:
Infopanel module – displays user defined image sequences
Keypad module – virtual touch keypad
Button module – virtual phone directory
Module connection options:
The module contains two2N
®
IP Versobus connectors.
These two connectors are fully interchangeable and can be used both as inputs from the
basic unit and outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The module package includes a 220 mm long interconnecting cable.
•
Caution
2N
®
IP Verso supports one Bluetooth module connection only. If connected at the
same time, multiple Bluetooth modules may result in an undesired behaviour.
