2N IP Verso - One Module Box

Installation manual 2N® IP Verso
68 / 241
•
•
•
•
•
•
•
•
Module Installation
2.2.1 One Module Box
2.2.2 Two Modules Box
2.2.3 More Two Module Boxes
2.2.4 Three Modules Boxes
2.2.5 More Three Modules Boxes
2.2.6 Tamper and I/O Modules
2.2.7 Module Dimensions
Mounting Backplate Installation
2.2.8 Example of Mounting Plate Installation
•
Warning
The main unit may not be removed from its base, so do not remove the marked
resin-cast screw in the right-hand upper corner. Any screw tampering results in a
loss of warranty.
