2N IP Verso - Tamper Switch

Installation manual 2N® IP Verso
203 / 241
•
•
•
•
Tamper Switch
The Tamper switch (Part No.9155038)is one of the2N
®
IP Versointercom elements and helps
secure the system against tampering.
The module contains two switches that open whenever the front frame is removed:
One switch leads directly to the terminal board and is designed for connection to an
external security exchange (32 V DC / 50 mA max).
The other switch, together with theI/O module (9155034)orWiegand module
(9155037), can be used for alarm signalling via the Automation interface in the2N
®
IP Versoconfiguration.
This module is not connected to the bus.
Tamper Switch Mounting
•
Caution
Remember to purchase an I/O module, Part No. 9155034, together with the tamper
switch.
