2N IP Verso - Touch Keypad & RFID Reader 125 Khz

Installation manual 2N® IP Verso
192 / 241
•
•
•
•
•
•
•
•
•
•
•
•
•
Touch Keypad & RFID Reader 125kHz, 13.56MHz, NFC
The Touch keypad with a combined 125 kHz and 13.56 MHz card reader(Part No. 9155081)is
one of the2N
®
IP Versointercom elements and is used for code/card access control, making
user calls and/or other functions. The keypad surface is very sensitive yet weatherproof at the
same time.
NFC – a licensed function, for 2N
®
Mobile Key for Android only.
The module contains two2N
®
IP Versobus connectors.
These two connectors are fully interchangeable and can be used either as inputs from the
basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N
®
Mobile Key

•
Tip
To accelerate card reading, you are recommended to select the card types used by
the user in the module settings.
