2N IP Verso - Bluetooth & RFID Reader 125 Khz

Installation manual 2N® IP Verso
190 / 241
•
•
•
•
•
•
•
•
•
•
•
•
•
Bluetooth & RFID Reader 125kHz, 13.56MHz, NFC
Bluetooth with a combined 125 kHz and 13.56 MHz card reader module (Part No. 9155082)is
one of the2N
®
IP Versointercom elements and is used for Smartphone/2N
®
Mobile Key tablet/
card access control, making user calls and/or other functions.      
NFC – a licensed function, for 2N
®
Mobile Key for Android only.
The module contains two2N
®
IP Verso bus connectors.
These two connectors are fully interchangeable and can be used either as inputs from the
basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N
®
Mobile Key

•
Tip
To accelerate card reading, you are recommended to select the card types used by
the user in the module settings.

•
Caution
2N
®
IP Verso supports one Bluetooth module connection only. If connected at the
same time, multiple Bluetooth modules may result in an undesired behaviour.
