2N IP Verso - Page 220

Installation manual 2N® IP Verso
220 / 241
•
•
Door Opening (Switch Activation) by Code
2N
®
IP Versois equipped with a door unlocking switch. Enter the valid code (refer
totheIntercom Configuration / Hardware / Switches subsection of Configuration Manual) using
your phone keypad to activate this switch.
Procedure:
Enter the switch 1 or 2 activating code using your phone keypad and press for
confirmation. Confirmation is unnecessary if theLock code without confirmationis
enabled,refer to theIntercom Configuration / Hardware / Switches / Advanced
subsection of Configuration Manual.
A valid code is signalled by the sound. An invalid codeor interruption longer than as
defined inTimeout for Entering Numbersis signalled by the sound.