Installation manual 2N® IP Verso
•
•
•
•
•
2N Part No. 91550371
Axis Part No. 02577-001
2N
®
IPVerso– OSDP module
The OSDP moduleprovides communication between a
connected device (control panel, door controller)
and2N
®
IP Versovia the OSDP. The module is
installed under another module, i.e. needs no separate
position.
2N Part No.9155038
Axis Part No. 01260-001
2N
®
IP Verso– Tamper switch
The module secures your system against tampering by
detecting intercom opening or top frame removing.
The module is installed on a special place and needs
no separate position.
Remember to purchase an I/O module, Part No.
9155034, together with the tamper switch.