2N IP Verso - Page 47

Installation manual 2N® IP Verso
47 / 241
•
•
•
•
•
•
Two-Wire Connection
2N Part No. 9159014EU/UK
2N Part No. 9159014US
Axis Part No. 01404-001
2N
®
2Wire
(set of 2 adaptors and power source for EU/US/UK)
The 2N
®
2Wire converter allows you to use the
existing wiring (2 wires) from your original doorbell or
door intercom to connect any IP device. You don’t
have to configure anything, all you need is one 2N
®
2Wire unit at each cable end and a power supply
connected to at least one of these units.
The 2N
®
2Wire unit then providesPoEpower not only
to the second converter, but also to all the other
connected IP end devices.
2N Part No. 1120103
Axis Part No. 02318-001
NVT PoLRE LPC Switch
with 2 adapters
IP solutions with analogue cabling