2N IP Verso - User and Button Setup

Installation manual 2N® IP Verso
7 / 241
•
•
•
•
•
•
Frames
2N Part
No.9155011
Axis Part No.
01278-001
Flush mounting frame
1 module
Covering frame for the 1-module brick/plasterboard flush
mounting box. The 1-module frame is used when another module
is added to the existing installation or when the module is
mounted to an extended interconnecting cable for an outgoing
reader, for example. Remember to order the frame when you order
a 1-module flush mounting box, Part No. 9155014.
2N Part
No.9155011B
Axis Part No.
01279-001
Flush mounting frame
1 module
Covering frame for the 1-module brick/plasterboard flush
mounting box. The 1-module frame is used when another module
is added to the existing installation or when the module is
mounted to an extended interconnecting cable for an outgoing
reader, for example. Remember to order the frame when you order
a 1-module flush mounting box, Part No. 9155014.
•
•
Caution
There must be just one (with/without a camera) main unit in every installation. The
main unit installation requires two frame/box positions; the other position,
however, is left for additional module installation.
One blind module is supplied with the main unit.
