26-6
Complete these tasks to configure a cluster:
Task Remarks
Enabling NDP Globally and for Specific Ports Optional
Configuring NDP Parameters Optional
Enabling NTDP Globally and for Specific Ports Optional
Configuring NTDP Parameters Optional
Manually Collecting Topology Information Optional
Enabling the Cluster Function Optional
Establishing a Cluster Required
Enabling Management VLAN Auto-negotiation Required
Configuring Communication Between the
Management Device and the Member Devices Within
a Cluster
Optional
Configuring Cluster Management Protocol Packets Optional
Configuring the
Management Device
Cluster Member Management Optional
Enabling NDP Optional
Enabling NTDP Optional
Manually Collecting Topology Information Optional
Enabling the Cluster Function Optional
Configuring the
Member Devices
Deleting a Member Device from a Cluster Optional
Configuring Access Between the Management Device and Its Member
Devices
Optional
Adding a Candidate Device to a Cluster Optional
Configuring Topology Management Optional
Configuring Interaction for a Cluster Optional
SNMP Configuration Synchronization Function Optional
Configuring
Advanced Cluster
Functions
Configuring Web User Accounts in Batches Optional
To Next Page
Loading...
