26-10
0 -rw- 1568 Jul 14 2008 11:54:04 aa(20080714).cfg
30861 KB total (20956 KB free)
To access the file system of the master, use the name of the storage device; to access the file system
of a slave, use the name in the following format: Member-ID#Storage-device-name.
For example:
1) To access the test folder under the root directory of the flash on the master, perform the following
steps:
<Master> mkdir test
...
%Created dir flash:/test.
<Master> dir
Directory of flash:/
0 -rw- 10105088 Apr 26 2000 13:44:57 test.bin
1 -rw- 2445 Apr 26 2000 15:18:19 config.cfg
2 drw- - Jul 14 2008 15:20:35 test
30861 KB total (20961 KB free)
2) To create and access the test folder under the root directory of the flash on IRF member slave 3,
perform the following steps:
<Master> mkdir slot3#flash:/test
%Created dir slot3#flash:/test.
<Master> cd slot3#flash:/test
<Master> pwd
slot3#flash:/test
Or:
<Master> cd slot3#flash:/
<Master> mkdir test
%Created dir slot3#flash:/test.
3) To copy the test.bin file on the master to the root directory of the flash on IRF member slave 3,
perform the following steps:
<Master> pwd
slot3#flash:
//The above information indicates that the current working path is the root directory of the flash on
slave 3.
<Master> cd flash:/
<Master> pwd
flash:
// The above operations indicate that the current working path is the root directory of the flash on the
master.
<Master> copy test.bin slot3#flash:/
Copy flash:/test.bin to slot3#flash:/test.bin?[Y/N]:y
%Copy file flash:/test.bin to slot3#flash:/test.bin...Done.
Configuration file management
1) Configuration file synchronization
To Next Page
Loading...
