3Com SuperStack 3 NBX - Page 144

144 CHAPTER 3: DEVICE CONFIGURATION
Adding a New Telephone Using Auto Discovery
Before you enable Auto Discovery, verify that a 3-digit or 4-digit dial plan
is installed on the Network Call Processor and that you have specified a
starting extension. See the NBX Installation Guide.
To add a new telephone using Auto Discovery:
1 In the NBX NetSet - Main Menu window (Figure 46
), click System
Configuration. The System Configuration window displays the System
Settings tab. See Figure 47
.
Figure 46 NBX NetSet - Main Menu Window
Figure 47 System Settings Tab