3Com SuperStack 3 NBX - Page 145

Adding, Removing, and Modifying Telephones 145
2 Click System-wide. The System Settings dialog box appears (Figure 48).
Figure 48 System Settings — System-Wide Dialog Box
3 Optionally, clear all check boxes associated with autodiscovering devices.
4 Enable Auto Discover Telephones, and then click Apply.
5 Optionally, enable the Auto Add Phones to Call Pickup Group 0 check
box.
Regardless of whether you select this check box, you can change the call
pickup group for any telephone later. See “Call Pickup”
in Chapter 4 for
information about Call Pickup Groups.
6 Click OK.
7 For each telephone that you want to autodiscover:
a Remove the telephone from the packing box.