f.
When the battery is charged
▪
Disconnect the charger from the power outlet.
▪
Unplug the charger from the 3M™ Clean-Trace™ LM1 Luminometer.
g.
The battery level indicator
▪
The battery level indicator is located at the upper right corner of the screen.
▪
When a 3M Clean-Trace Luminometer is on, the indicator shows the remaining battery level.
▪
As the battery charge decreases, the filled segment of the indicator becomes smaller as well as does the
number indicating the percentage charge.
▪
When the battery level is less than 20%, a notification will display, showing the
battery should be recharged.
▪
When the battery level is less than 10%, the indicator becomes red, showing the
battery should be recharged.
▪
When the battery level is less than 5%, the 3M Clean-Trace Luminometer
automatically shuts down.
h.
Power management
The 3M Clean-Trace Luminometer conserves battery power if the device is not in use.
▪
After 5 minutes of inactivity, the 3M Clean-Trace LM1 Luminometer goes into Sleep mode and the screen
darkens. This time can be customized, refer to Changing sleep timeout section.
▪
After 2 additional hours of inactivity, the 3M Clean-Trace Luminometer automatically shuts down and must be
powered on again before use. Refer to the Switching the Power on section of this User manual for more
information.
To Next Page
Loading...
