56 78-9000-5020-0 Rev C
All the information retrieved from the marker, including the date and time read, is
saved into the ‘Read History’ le of the receiver. If a hand-held GPS device is used in
conjunction with the receiver, coordinates will be saved into the "Read History" le also.
(See 17. Reviewing Marker Read/Write History)
17. Reviewing Marker Read/Write History
A. Read History
The Read History mode is a historical le of all information that has been read from
targeted markers (100 memory locations).
Menu [6] + Data/Templat [SK:2] + Read History [SK:2a]
The Read History screen displays the date and
time that each marker was read, and its unique
identication (serial) number.
• Select the marker data to be viewed by pressing the
up/down arrows [SK].
• Press Marker Details [SK] to view all data that was
retrieved from the marker.
• Press Read History [SK] to return to list or press
Exit [SK] to return to Data/Template review
display.
B. Write History [SK]
Menu [6] + Data Templat [SK:2] + Write History [SK:2b]
• Select the marker data to be viewed by pressing the
up/down arrows [SK].
• Press Write Details [SK] to view all data that was
sent to the marker.
• Press Write History [SK] to return to the list of
programmed data.
• Press Exit [SK] to return to Data/Template review
display.
For additional information concerning writing to 3M
™
iD Markers, refer to
www.3M.com/dynatel - Instruction Manual M-Series Locator PC Tools.
To Next Page
Loading...
Need help?
General
