To Next Page

To Previous Page

page 37 | Document No.: TH-930-001 - 1/26/2015

A10 Thunder Series 930 Installation Guide

Sliding Rail Kit Installation

4. Press the finger tab located near the front of the chassis. You can push the tab in either direction. This unlocks the rails

so you can slide the chassis into the rack.

5. Carefully slide the chassis all the way into the rack. The chassis is fully inserted when the chassis handles are against the

front rack posts.

Questions and Answers:

Need help?

Do you have a question about the A10 Thunder series 930 and is the answer not in the manual?

A10 Thunder series 930 Specifications

General