Aastra M710/M715 - Page 141

Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
M7xx and I7xx set options 05/2008 Page 6-13
6.6.4.2.2 Daughter card connectors
6.6.4.2.2.1Stereo jack connector
The diameter of the jack is 3.5 mm.
6.6.4.2.2.2Minitel/MODEM connector
The switch located on the card is used to configure several types of connection:
• Switch in the upper position (on the side with the 2 connectors and jack), for configurations that
are compatible with the current Minitel base,
• Switch in the lower position, to connect a standard modem.
Default configuration
In the standard range, the switch is set to the lower position on delivery.
For France Telecom, the switch is set to the upper position on delivery.

3TEREO*ACK#ONNECTOR
!UDIOINPUT
!UDIOOUTPUT
'ROUND
*
STANDARDMODEMACCESS
STANDARDMODEMACCESS
INSTALLEDPARKMODEMACCESS
3WITCHPOSITIONDEPENDONACCESSTYPE
STANDARDPOSBYDEFAULT
INSTALLEDPARKPOS




$AUGHTERCARD
#ONNECTOR
*
-INITEL-ODEMCONNECTOR