Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
SIP PHONEs 480i, 9112i and 9133i 05/2008 Page 8-47
8.9.9 Configuring Ethernet switches for SIP phones
8.9.9.1 Remote power supply to SIP phones:
SIP phones 480i and 9133i are PoE compatible (802.3af).
Phone 9112i requires mains power supply.
8.9.9.2 Modes supported by the phone’s integrated switch ports
Ports of phones 9112i, 9133i and 480i only support ‘Auto-negotiation’ mode.
Phones 53i, 55i and 57i will allow the choice of ‘Auto-negotiation/ half/full’.
Viewing the result of the negotiation on the phone
Press the ‘Options’ key and select ‘Phone Status’:
To Next Page
Loading...
