Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
SIP PHONEs 480i, 9112i and 9133i 05/2008 Page 8-15
8.8 Aastra SIP phone configuration modes
You can configure SIP phones through:
• Direct access to the phone
• Access via the phone’s WEB interface
• By loading the configuration files via DHCP/TFTP.
Aastra Matra recommends configuring the SIP phones using the files aastra.cfg and @MAC.cfg, to
allow rational management of a pool of phones.
However, to quickly implement some phones on a breadboard, you may envisage direct
configuration on the phone or via the WEB interface.
Example: configuring an SIP phone in a simplified environment
Figure 8.7 Configuring an SIP phone in a simplified environment
6,3SKRQH
6WDQGDORQH
,36ERDUG
6,3DFFHVVSRLQW
7)73VHUYHU
To Next Page
Loading...
