AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 9-22 05/2008 SIP PHONES 51i, 53i, 55i AND 57i
9.11.2.2 Configuring basic network settings
Procedure:
• Login in Administrator mode
• Click on ’Advanced Settings > Network’. In Basic Network Settings, enable the "DHCP" field by
checking the check box to get the basic network settings automatically. If you disable DHCP,
you need to configure the following network settings manually:
- IP Address
- Subnet Mask
- Gateway
- Primary DNS
- Secondary DNS
• Click on <Save Settings> to save your configuration
Figure 9.11 Configuring basic network settings
To Next Page
Loading...
