Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
About this document 05/2008 Page 1-1
1 ABOUT THIS DOCUMENT
1.1 Purpose of this document
This document describes how to install digital terminals in the M7xx range and the i7xx IP range,
and details the available options.
A section describes how to install and configure the i220 SIP set.
A section describes how to install and configure the 480i, 9112i and 9133i SIP sets.
A section describes how to install and configure the 51i, 53i, 55i and 57i SIP sets.
1.2 Document audience
This document is intended for installers and provides the following information:
• list of the digital terminals, references and main features,
• list of the IP terminals, references and main features,
• list of the IP cartridges, references and main features,
• connection mode,
• settings and options.
1.3 Scope of this document
This manual applies to digital terminals in the M7xx range and i7xx IP range terminals associated
with M6500 and NeXspan PBXs, i220 SIP set and 480i, 9112i, 9133i, 51i, 53i, 55i and 57i SIP sets.
1.4 Contents of this document
This document contains the following chapters:
• General information
• References
• Presentation of the digital terminals in the M7xx range
• Overview of the IP sets in the i7xx range
• Overview of digital set and IP set options
• Overview of i220 SIP set
• Overview of 480i, 9112i and 9133i SIP sets
• Overview of 51i, 53i, 55i and 57i SIP sets
• Packaging
• Installation rules
• Special features of IP sets
• Download
• Spare parts
• Maintenance
To Next Page
Loading...
