Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
Installation of sets in the M7xx range 05/2008 Page 4-21
4.6.1 Main features
The functions are the same as those offered by M760, see Section 4.5.1. The only difference lies
in the signalling of the 20 programmable keys which is done via LCD on an M760E set, and via
LCD icons on an M760 set.
4.6.2 Marketing Codes
4.6.3 Options
A maximum of two extension modules can be connected to the M760E:
• either 2 M700/M710s,
• or 1 M700/M710s + 1 M705/M715.
Analogue options card, see section 6.6.
4.6.4 Installation
4.6.4.1 Connections
See connection diagram, section 12.2
4.6.4.2 Connection
To the telephone network: by a 3.10 m long cord with an RJ45 type male connector for the wall
end connection and an RJ11 type male connector for connection at the set end.
To the telephone handset: by a coiled cable with an RJ9 type male connector at each end.
To the headset: see Section 12.3.1.
4.6.4.3 Starting
Recommandations:
Before R1.3, the user had to select the set's language (label display managed locally by the set) in
order to synchronize it with the system it was connected to (label display sent by the system in the
country's language).
As of R1.3, this synchronization is performed automatically when the set is connected.
Reference Code
M760E PO compatible, Nordic handset, anthracite blue, AZERTY keypad
AMTD2880B
M760E PO compatible, Nordic handset, anthracite blue, QWERTY keypad
AMTD2885B
M760E PO compatible, Nordic handset, glacier white, AZERTY keypad
AMTD2880C
M760E PO compatible, Nordic handset, glacier white, QWERTY keypad
AMTD2885C
Latin handsets are no longer included in the catalogue.
To Next Page
Loading...
