AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 7-6 05/2008 i220 SIP set
To go from another web page, select one of the following items:
Admin
/ Network / SIP / Phone / Advanced / Speeddial / Info / Upload
For a detailed description of Web interface, refer to Administrator Guide of i220 IP set (see § 1.6.1).
Note : After each change of the Web page, click on Save to make a backup.
• Select Network
In the field NTP Server, check that the IP address corresponds to the site where the time and
date software is used.
• Select SIP
²Configuration menu for directory number and IP address of the PBX.
• Select Advanced
Check and/or complete settings menu of the local port and QoS (i220 set):
-Select "Sequential" in the field Jitter buffer type.
- If VLAN is activated, the fields Priority et DiffServ Codepoint must be completed:
®Priority = 5 or 6 (depends network date)
®DiffServ Codepoint = 184 in decimal (b8 in hexadecimal)
- Local RTP port = 40 000 (default)
Fields to be filled Informations to be entered
Domain name for the "Registrar "SIP NeXspan Communication Server IP address
Number of "Registrar" port SIP Do not change this number predefined in the SIP proxy
Output proxy SIP server NeXspan Communication Server IP address
Output proxy SIP port Do not change this number predefined in the SIP proxy
Name Label
SIP user name Directory number of the i220 SIP set, defined in the PBX
To Next Page
Loading...
