Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
SIP PHONEs 480i, 9112i and 9133i 05/2008 Page 8-39
traffic is only marked between the phone and the network.
QoS eth port 0 priority: 6 # Priority level 2 for phone traffic (ToIP)
QoS eth port 1 priority: 0 # Priority level 2 for Data traffic from the PC
#non-ip priority: 0 # Priority of non-IP packets
# If the TOS priority map is not defined, correspondence between DiffServ and 802.1Q:
# DSCP(Diffserv) => Priority
# 0-7 => 0
# 8-15 => 1
# 16-23 => 2
# 24-31 => 3
# 32-39 => 4
# 40-47 => 5
# 48-55 => 6
# 56-63 => 7
# Working of QoS
# The traffic is marked on levels 2 (VLAN) and 3 (DiffServ) between the phone and the
network. The phone retrieves the marking on the traffic to the PC and marks the traffic from
the PC to the network: VLAN=3 and priority=0.
#The phone accepts the marked frames in VLAN 2 and sends its traffic in VLAN 2 with
priority 6. In level 3, signal and voice are marked as B8h.
#
###########################################################################
#sip nortel nat support: 0 # Use the default value for NeXspan
#sip nortel nat timer: 60 # Use the default value for NeXspan
#sip nat ip: 0.0.0.0 # Use the default value for NeXspan
#SIP NAT PORT: 0 # Use the default value for NeXspan
###########################################################################
#sip session timer: 0 # Use the default value for NeXspan
#sip T1 timer: 0 # Use the default value for NeXspan
#sip T2 timer: 0 # Use the default value for NeXspan
#sip transaction timer: 4000 # Use the default value for NeXspan
###########################################################################
#sip use basic codecs: 0 # not utilised - the codecs are chosen by NeXspan
#sip auth name: # No authentication for NeXspan
#sip password: # No password for NeXspan
#sip line1 vmail: 797 # Voice mail call
#headset tx gain: 0 # Audio gain adjustment +/-10dB
#headset sidetone gain: 0
#handset tx gain: 0
#handset sidetone gain: 0
#handsfree tx gain: 0
To Next Page
Loading...
