AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 9-20 05/2008 SIP PHONES 51i, 53i, 55i AND 57i
9.11.1.2 Entering the basic SIP parameters
• Press on the ’Options’ key
• Select in the options list the menu ’Administrator menu’ and press on ’Select’ softkey
• Enter administrator password (22222) and validate with the softkey’Enter’
• Select the menu ’SIP settings’ and press on ’Select’ softkey
• Use the softkey ’Select’ to verify the contain of each SIP parameter and modify it
• Use the navigation keys to reach the various SIP parameters:
1- Proxy IP
2- Proxy port
3- IP address
4- Port address
5- Save
6- Username
In this example, the configuration will be:
• Proxy IP=192.168.65.2
• Proxy port=5060
• IP address=192.168.65.2
• Port address=5060
• Username=3010
• Screen name=3010
9.11.1.3 Restoring the factory settings of the SIP phone
• Press on the ’Options’ key
• Select in the options list the menu ’Administrator menu’ and press on ’Select’ softkey
• Enter administrator password (22222) and validate with the softkey’Enter’
• Select the menu ’Factory default’ and press on ’Select’ softkey
• Press on ’Default’ softkey then on ’Restart’ softkey to validate the restoring the factory settings
of the SIP phone
To Next Page
Loading...
