AMT/PTD/TR/0001/3/7/EN Installation Manual for digital sets - IP sets - SIP sets
Page 9-58 05/2008 SIP PHONES 51i, 53i, 55i AND 57i
9.12.7.3 Architecture using the SIP access point in NSAP
Configuring the SIP access point:
• Set up a connection to the WEB server: http :@IP_NSAP/gsi/home.cgi
• Choose the ‘Configuration’ tab to open the SIP access point network parameter configuration
window.
• Enter the iPBX IP address.
• The default SIP UDP port is port 5060.
• Confirm the configuration.
Viewing the NSAP SIP access-point software release:
• This task is performed in the Release tab of the web interface and is used to view the SIP
access point release.
To Next Page
Loading...
