Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
Installation rules 05/2008 Page 12-9
12.3.1.1.2Headset connected on handset socket
AUTOMATIC MODE (on a PBX release < R1.3)
Set concerned: M730
Configuration: HEADSET on Handset Socket
HANDSET removed and PEDAL released by the handset.
A CCO is required to select AUTOMATIC MODE via SERVICE/PROG/CONNEX.
Nota : If the headset is physically disconnected during a call with the headset or in
group listening mode, the set switches to hands-free mode.
Nota : The red key terminates the call in all cases.
&DOOZLWKWKHKHDGVHW
$PSOLILHGOLVWHQLQJ
,1%281'&$//
RU
287%281'
&$//
,ISHGDOLV
SUHVVHGDQG
KHOGGRZQ
To Next Page
Loading...
