Installation Manual for digital sets - IP sets - SIP sets AMT/PTD/TR/0001/3/7/EN
To install sets and cartridges in the i7XX range 05/2008 Page 5-29
Important notes:
• Press to move to the next option, regardless of whether you are on a label field or on an
option entry field (that has or has not been completed).
• Press when on the first "Phone number" option to directly access the last "VLAN Id
Activation" option (if option = 0) or "Priority" (if option = 1) .
• You can validate with at any time (in a labelled or entry field), even if only one field has
been modified, you will hear two validation beeps.
Except for compulsory fields that have a default value, any attempt to validate or move on to the
next option when a compulsory field is not filled in will generate refusal beeps.
Press at any time to cancel current programming without the modifications becoming
effective.
• If there is a power failure during the programming (or modification) phase, the changes will not
be saved.
• There is no "timeout" after accessing a configuration menu. You can only exit by pressing
or once.
Nota : Press to exit, even if you have not made any modification
WKHFXUVRUDSSHDUVLQVWHDG
RIWKHODVWFKDUDFWHUGHOHWHG
7KHGRWLVHQWHUHGPDQXDOO\
%DFNWRWKHILUVWRSWLRQ
&RQILUPDQGH[LW
SURJUDPPLQJ
$XWKRULVHGYDOXHV
'ORDGLQJ3RUW
9ODQ,'WR
)RURSWLRQ
To Next Page
Loading...
