147
IDENTIFICATION
DATA
The following identification codes are
printed and shownon the plates:
Vehicle identificationnumber (VIN)
plate.
Chassis marking.
Bodywork paint identification plate.
Motor marking.
VEHICLE
IDENTIFICATION
NUMBER(VIN)PLATE
It is applied to the left side of the rear
floor in the luggagecompartment or,
depending on theversion, on the
passenger-side rear pillar. It contains
the following information fig. 139:
139F1D1044
AName of Manufacturer.
B Type-approval number.
C Car type identification code and
progressive vehicleidentification
number (VIN).
DMaximum authorized weightof
vehicle fully laden.
EMaximum authorised weightof fully
laden car plus trailer.
F Maximum permitted weight on first
axle (front).
G Maximum permitted weight on
second axle (rear).
H Engine type.
IBodywork version code.
LSpare part reference number.
MColour code (for versions/markets,
where provided).
CHASSISMARKING
It is located on theright side of the
luggage compartment floor and bears
the following data fig. 140:
140AB0A0345C
car type;
chassis serial number.
BODYWORKPAINT
IDENTIFICATIONPLATE
The plate is appliedon the external
tailgate post (left side) and it bears the
following data fig. 141:
141AB0A0344C
APaint manufacturer.
B Colour name.
C Colour code.
DRespray and touch up code.
MOTORMARKING
It is stamped on the cylinder block and
includes the type and the engine serial
number.
To Next Page
Loading...
