GETTING TO KNOW YOUR CAR
14
Dealership to have new keys (up to 8)
stored with a code.
If the
symbol appears,along with
a dedicated message, this means that
the system is running a self-diagnosis
(for example for a voltage drop). If the
symbols remains on, contact an
Abarth Dealership.
DOORS
8)
1)
DOORCENTRAL
LOCKING/UNLOCKING
Doorunlockingfromtheoutside
Press thebutton on the keyor turn
the metal insert (located inside the key)
to position (A) fig. 7 inthe driver side
door lock.
7AB0A0041C
When the key is turned the doors
and the tailgate aresimultaneously
unlocked.
Lockingfromtheoutside
With the doors closed, press the
button on the keyor fit and then turn
the metal insert (located inside the key)
to position (B) fig. 7 inthe driver side
door lock.
WARNING If one of the doors is not
completely closedor if there is a fault
in the system, thecentral locking will
not be activated. Ifthe operation
is repeated 10/11times in quick
succession, the device is excluded for
approximately 30 seconds.
Doorunlockingfromtheinside
To unlock from inside (door and tailgate
locks) pull handle (1) fig. 8 (position A).
8AB0A0425C
Doorlockingfromtheinside
To lock the doorsand tailgate from the
inside, push handle(1) fig. 8 towards
the door panel (position B).
Operating the handle on driver or
passenger side locks both doors and
tailgate.
The correct lever position with locked
doors is shown bythe red (2) symbol,
visible on the handles.
WARNING
8)
Before opening a door, ensure that you
can do it in conditionsof safety. Open the
doors only when the car is stationary.
IMPORTANT
1)
Make sure to take the key with you
once a door or thetailgateis locked, to
prevent locking the same key inside the
car. If the key is lockedinside, it can only
be retrieved by usingthesecond key
provided.