Abarth 595 - FLUIDS AND LUBRICANTS

TECHNICAL SPECIFICATIONS
162
FLUIDSANDLUBRICANTS
Your car is equipped with an engine oil that has been thoroughlydeveloped and tested in order to meet therequirements of
the Service Schedule. Constant use of the prescribed lubricantsguarantees the fuel consumption and emission specifications.
Lubricant quality iscrucial for engine operation and duration.
If lubricants conforming to the specific request are not available, products that meet the indicated specifications can be used to
top up; in this caseoptimal performance of the engine is not guaranteed.
55)
PRODUCTSPECIFICATIONS
UseFeaturesSpecification
Originalliquidsand
lubricants
Applications
Fully syntheticlubricant
for ultrahigh performance
engines
SAE 10W–50ACEA C3
9.55535-GH2
SELENIAABARTH
10W50
Contractual Technical
Reference No.0101
According toService
Schedule
Lubricants andgreases for
drive transmission
Synthetic baselubricant
SAE 75Wgrade
9.55550-MZ6
TUTELA
TRANSMISSION
GEARFORCE
Contractual Technical
Reference N° F002.F10
Manual gearboxand
differential
Fully syntheticlubricant
with dedicatedadditive
9.55550-SA1
TUTELACSSPEED
Contractual Technical
Reference N° F005.F98
Robotised sequential
transmission hydraulic
activation system
Molybdenum disulphide
grease, foruse athigh
temperatures. N.L.G.I.
consistency 1-2.
9.55580-GRASII
TUTELAALLSTAR
Contractual Technical
Reference N° F702.G07
Wheel sideconstant
velocity joints
Low frictioncoefficient
grease forconstant
velocity joints.N.L.G.I.
consistency 0-1.
9.55580-GRASII
TUTELASTAR700
Contractual Technical
Reference N° F701.C07
Differential sideconstant
velocity joints