189
previous system pairing also from the
list of
Bluetooth® devices on the
phone and makea new pairing.
USBSOURCE
To activate the USB mode, insert the
corresponding device into the USB port
on the central console.
If a USB device isinserted with the
system on, it will start playing the
tracks found on the device.
AUXSOURCE
To activate AUX mode, insert an
appropriate devicein the AUX socket
on the car.
When a device is inserted using
the AUX output socket the system
starts reproducingthe AUX source
connected, if it is already playing.
Adjust the volumeusing the
button/knob on the front panel or using
the volume adjustment control on the
connected device.
The "AUX volumecompensation"
function can be selected in Radio
mode only when the AUX source is
active.
WARNING The functions of the device
connected with the AUX socket
are directly managed by the device
itself: it is not possible to change
track/folder/playlist or control playing
start/end/pause with the controls on
the front panel or on the steering
wheel.
Do not leave the cable of your portable
player connectedto the AUX socket
after disconnection, to avoid possible
hiss from the speakers.
TRIPCOMPUTER
Press the "Trip" button on the display
to view the car's trip information.
This function is composed of the
“Instant info” items (“Range” and
“Current fuel consumption”) and the
two separate tripscalled “Trip A” and
“Trip B” for monitoring the vehicle's
"complete journey"in a reciprocally
independent manner.
Both functions canbe reset (reset -
start of a new journey): to reset the
desired "Trip" hold down the "Trip A" or
"Trip B" buttons.
PHONEMODE
PHONEMODEACTIVATION
Press the “Phone”button on the
display to activatethe Phone mode.
NOTE To consultthe list of mobile
phones and supported functions, visit
the www.driveuconnect.eu website.
Use the graphic buttons on the display
to:
dial the phone number (using the
graphic dial pad onthe display);
display and call the contacts in the
phonebook of themobile phone;
display and call contacts from the
registers of previous calls;
pair up to 10 phones/audio device
to make access and connection easier
and quicker;
transfer calls from the system to
the mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phoneaudio is transmitted
through the car’ssound system; the
system automatically mutes the radio
when the Phone function is used.
PAIRING AMOBILEPHONE
WARNING Carry out this operation
only with car stationary and in safety
conditions; this function is deactivated
when the car is moving. The pairing
procedure for a mobile phone is
described below: always consult the
handbook for the mobile phone in any
case.
To pair the mobile phone, proceed as
follows:
activate the Bluetooth® function on
the mobile phone;
press the "Phone"graphic button on
the display;
To Next Page
Loading...
