5
AUSTRALIA VERSION
CHILD RESTRAINTS
1)
The recommendation of the ISO child
(restraints) seats to be used with the
vehicle in the main Owner Handbook
complies with AS/NZS 1754-2013.
CHILD RESTRAINT
INSTALLATION
Your vehicle has been designed to
accommodate child restraints on
the rearmost seats. When using a
child restraint, read the Installation
Instructions supplied with the child
restraint and follow the directions for
fitment carefully.
Fasten the upper belt (that is supplied
together with the child seat) to the
fastener B-fig.3 set between the rear
back-rest and the boot floor.
3 F0S0134
INSTALLATION OF THE
ATTACHING CLIP
Correct engagement of the child
restraint attaching clip 1-fig.4 is
achieved by depressing the retainer
spring 2 and then passing through
the opening of the anchor fitting 3 as
shown in the illustration.
FRONT
1
2
3
4 F0S167Ab
WARNING
1) When installing a child restraint
ensure that head restraint is raised
and tether strap is placed underneath
directly on the top of the seat back. Child
restraint anchorages are designed to
withstand only those loads imposed by
correct-ly fitted child restraints. Under
no circumstances are they to be used
for adult seat belts, harnesses or for
attaching other items or equipment to the
vehicle.
To Next Page
Loading...
