Operation Manual / 4 Product description / A100-M axial
5 Operation and service / 5.2 Service work
© Copyright 2019 ABB. All rights reserved. HZTL4033_DE Revision C February 2019
5.2.6 Entries in the engine logbook
Monitoring the engine system enables conclusions to be made on the operating behaviour
of the turbocharger.
The following operating data and measured values must be entered regularly into the engine
logbook of the enginebuilder:
¡ Performance and speed of the engine
¡ Speed of the turbocharger
¡ Air intake temperature
¡ Exhaust gas temperature before and after the turbine
¡ Pressure of the charge air
¡ Pressure loss in the charge air cooler
¡ Lubricating oil pressure and lubricating oil temperature
If present:
¡ Air temperature after the compressor and after the charge-air cooler
¡ Pressure loss in the filter silencer
Page 30 / 108
To Next Page
Loading...
