48 ACH580 Installation, Operation and Maintenance Manual
ACH580-01 Installation
Note: Enter the following values exactly as
shown on the motor nameplate.
4
Select the localization you want to use and press
(Next).
5
Change the units shown on the panel if needed.
Go to the edit view of a selected row by pressing .
Scroll the view with and .
Go to the next view by pressing (Next).
6
To select a value in an edit view:
Use and to select the value.
Press (Save) to accept the new setting, or press
(Cancel) to go back to the previous view without
making changes.
7
Set the date and time as well as date and time display
formats.
Go to the edit view of a selected row by pressing .
Scroll the view with and .
Go to the next view by pressing (Next).
Example of a nameplate of an
induction (asynchronous) motor.
To Next Page
Loading...
