ABB ACH580 Series - Page 77

ACH580 Installation, Operation and Maintenance Manual 77
ACH580-01 Installation
80A0 AI supervision
Programmable fault:
12.03 AI supervision
function
An analog signal is
outside the limits
specified for the analog
input.
Check signal level at the analog input.
Check the auxiliary code.
Check the wiring connected to the
input.
Check the minimum and maximum
limits of the input in parameter group
12 Standard AI.
0001 AI1LessMIN
0002 AI1GreaterMAX
0003 AI2LessMIN.
0004 AI2GreaterMAX
80B0 Signal supervision 1
(Editable message text)
Programmable fault:
32.06 Supervision 1 action
Fault generated by the
signal supervision
function 1.
Check the source of the fault
(parameter 32.07 Supervision 1
signal).
80B1 Signal supervision 2
(Editable message text)
Programmable fault:
32.16 Supervision 2 action
Fault generated by the
signal supervision
function 2.
Check the source of the fault
(parameter 32.17 Supervision 2
signal).
80B2 Signal supervision 3
(Editable message text)
Programmable fault:
32.26 Supervision 3 action
Fault generated by the
signal supervision
function 3.
Check the source of the fault
(parameter 32.27 Supervision 3
signal).
80B3 Signal supervision 4
(Editable message text)
Programmable fault:
32.36 Supervision 4 action
Fault generated by the
signal supervision
function 4.
Check the source of the fault
(parameter 32.37 Supervision 4
signal).
80B4 Signal supervision 5
(Editable message text)
Programmable fault:
32.46 Supervision 5 action
Fault generated by the
signal supervision
function 5.
Check the source of the fault
(parameter 32.47 Supervision 5
signal).
80B5 Signal supervision 6
(Editable message text)
Programmable fault:
32.56 Supervision 6 action
Fault generated by the
signal supervision
function 6.
Check the source of the fault
(parameter 32.57 Supervision 6
signal).
9081 External fault 1
(Editable message text)
Programmable fault: 31.01
External event 1 source
31.02 External event 1
type
Fault in external device
1.
Check the external device.
Check setting of parameter 31.01
External event 1 source.
9082 External fault 2
(Editable message text)
Programmable fault: 31.03
External event 2 source
31.04 External event 2
type
Fault in external device
2.
Check the external device.
Check setting of parameter 31.03
External event 2 source.
Code
(hex)
Fault / Aux. code Cause What to do