ABB ACQ580-34 - Required Parts; Required Tools

Required parts
Drive module standard parts
• Drive module and LCL filter module
• Fastening brackets (2 pcs)
• Pedestal guide plates (2 pcs)
• Telescopic extraction/installation ramp
• Fastening screws and insulators in a plastic bag
Rittal parts / Alternative ABB parts
DescriptionQty (pcs)Rittal part code
Enclosure without bottom plates and side panels. Includes supports
for installing air baffles.
18806.000
Spacers for roof plates / ABB roof17967.000
(one set = four pieces)
Punched section with mounting flange, inner mounting level for
800 mm horizontal
18100.743
Air filter. Remove the filter mats.4Contact ABB for the suitable filter
Alternative ABB parts for Rittal parts
See section Air inlet kits (page 160)
2ABB air inlet kit 800 mm
3AUA0000117005 (IP20)
3AUA0000117009 (IP42)
See section Air outlet kits (page 162)
2ABB air outlet kit 800 mm
3AUA0000125203 (IP20 )
3AUA0000114968 (IP42)
Customer-made parts (not ABB or Rittal products)
See section Air baffles (page 189)
4Air baffles
See section Bottom plate (page 188)
1Bottom plate
Required tools
• Set of screw drivers (Torx and Pozidriv)
• Set of metric magnetic-end hexagon sockets
• Torque wrench
• Step drill bit for drilling the holes in the clear plastic shroud for input power cables (option
+B051)
Overall flowchart of the installation process
For instructions, seeTaskStep
Installing the drive module and LCL filter module
into an enclosure (page 135)
Install the Rittal parts, drive bottom guide plate
and loose drive options in the drive module cu-
bicle
1
The component manufacturer’s instructionsInstall the auxiliary components (such as mount-
ing plates, switches, busbars etc.)
2
Preventing the recirculation of hot air (page 55)
Installing the drive module and LCL filter module
into an enclosure (page 135)
Attach the drive module and LCL filter module
into the enclosure
3
134 Installation example in Rittal VX25 enclosure