ABB ACQ580-34 - Attaching the Drive Module and LCL Filter Module to a Mounting Plate or Wall; Attaching the Drive Module to the LCL Filter Module; Attaching the Drive Module and the LCL Filter Module to the Enclosure Base

Attaching the drive module and LCL filter module to a
mounting plate or wall
Attach the LCL filter module and the drive module to wall or a mounting plate at the points
shown below.
You can attach the modules to Rittal VX25 enclosure with the mounting brackets delivered
with the drive, see Step-by-step drawings for an installation example of standard drive
configuration in Rittal VX25 800 mm wide enclosure (page 229).
Attaching the drive module to the LCL filter module
See Step-by-step drawings for an installation example of standard drive configuration in
Rittal VX25 800 mm wide enclosure (page 229).
Attaching the drive module and the LCL filter module to
the enclosure base
See Step-by-step drawings for an installation example of standard drive configuration in
Rittal VX25 800 mm wide enclosure (page 229).
Mechanical installation 67
10