ABB ACQ580-34 - Layout Example, Door Open (Option +B051)

Note: See also section Required free space (page 58).
Layout example, door open (option +B051)
PE
T3/W2
T2/V2
T1/U2
1
4
5
6
7
3
2a
2a
13
14
10
11
3
2c
L1/U1
L2/V1
L3/W1
2b
14
12
A
A
A – A
15
3
9
B– B
16
8
B
B
2c
LCL filter module8Supporting frame of the cabinet1
Motor cable including the protective ground con-
ductor of the drive module
9
Vertical (2a) and horizontal (2b) air baffles that
separate the cool and hot areas (leakproof
entries). See section Preventing the recirculation
of hot air (page 55).
2a
Drive module control unit.
Note: The upper door air inlet is critical for proper
cooling of the control unit.
102b
External control cables11
Optional air baffle that is needed when there is
no fan on the lower part of the cabinet door. See
section Preventing the recirculation of hot
air (page 55).
2c
Grounding screws12Cabinet grounding busbar (PE)3
Alternative to grounding screws (12)13Input power cable including the protective ground
conductor (PE) of the drive
4
Air flow to the roof14Disconnector and fuses5
Air flow through the drive module15Contactor6
Air flow through the LCL filter16Drive module7
54 Guidelines for planning the mechanical installation