ABB ACS380 - Page 40

Refer to the ACS380 Firmware manual (3AXD50000029275 [English]) for information
on how to use the interface, start-up the drive and modify settings and parameters.
1
2 3
5
4
7
d
b
6
e
e
c
a
Display (Home view):
1
a) Control location: local or remote
b) Status icons
c) Reference target value
d) Actual measured value
e) Left and right softkey actions
Back key (opens the Options view in the Home view)
2
OK key (opens the Menu in the Home view)
3
Arrow keys (menu navigation and setting values)4
Stop key (when the drive is locally controlled)
5
Start key (when the drive is locally controlled)
6
Status LED:7
• Steady green: Normal operation
• Blinking green: Active warning
• Steady red: Active fault
• Blinking red: Active fault, set power to off to reset
The user interface in brief:
•
In the Home view, push the Back key to open the Options view.
•
In the Home view, push the OK key to open the Menu.
• Navigate the views with the arrow keys.
40 Operation principle and hardware description