Start-up 95
Check the direction of the motor.
If it is forward, select Yes, motor is spinning forward
and press (Next) to continue.
If the direction is not forward, select No, fix direction
and press (Next) to continue.
If you want to make a backup of the settings made so far,
select Backup and press (Next).
If you do not want to make a backup, select Not now and
press (Next).
The first start is now complete and the drive is ready for
use.
Press (Done) to enter the Home view.
The Home view monitoring the values of the selected
signals is shown on the panel.
2 – Additional settings in the Primary settings menu
Make any additional adjustments, for example macro,
ramps and limits, starting from the Main menu – press
(Menu) to enter the Main menu.
Select Primary settings and press (Select) (or ).
We recommend that you make at least these additional
settings:
• Choose a macro or set start, stop and reference values
individually
•Ramps
• Limits
With the Primary settings menu, you can also adjust
settings related to the motor, PID, fieldbus, advanced
functions and clock, region and display. In addition, the
menu contains an item to reset the panel Home view.
To get more information on the Primary settings menu
items, press to open the help page.
To Next Page
Loading...
