EL3000 CONTINUOUS GAS ANALYZERS | OI/EL3000-EN REV. D 61
Gas connections Limas23 (model EL3020)
Figure 14: Gas connections Limas23 (model EL3020)
Limas23: Gas connections
Supplementary information
Without optional solenoid valve
Screwed connections with hose nozzles (stainless
steel
1.4305) for hoses with 4 mm inside diameter
(included in scope of supply)
With optional solenoid valve, factory-connected to sample
gas input Pos. 1
For ‘Pressure sensor connected to the outside by hose’
With optional solenoid valve
Screwed fittings with hose nozzles (PVDF) for
hoses with
4 mm inside diameter
(included in scope of supply)
Note
The pressure sensor (standard, not for the ‘pressure sensor connected to outside by hose’ option), and the oxygen sensor (option)
are internally connected in the outlet of the sample cell.