ABB IRB 1600 - 5/1.2 - Page 194

6 Reference information
6.4. Screw joints
3HAC023637-001 Revision: B192
The table below specifies the recommended standard tightening torque for water and air
connectors when one or both connectors are made of brass.
Dimension
Tightening torque
Nm - Nominal
Tightening torque
Nm - Min.
Tightening torque
Nm - Max.
1/8 12 8 15
1/4 15 10 20
3/8 20 15 25
1/2 40 30 50
3/4 70 55 90
Continued