2101510MNAH | NGC8200 AND PGC1000 USER MANUAL | 103
c. Select Reload.
d. Select the following three reload options: Shutdown Flash, Download Flash, and Start
Flash.
e. Verify that the Network IP address in the Connection field (bottom, left of the screen) is the
address of the device you intend to update.
f. Click Start.
Figure 10-6: Load the Flash
6. Load the OS if required (Figure 10-7):
a. Click the Windows browse button to locate the Flash file in your system.
b. Select the OS file: 2102141-0xx6.ngc. Where xx is the version of the update package.
c. Select Reload.
d. Select the following four reload options: Shutdown Flash, Download Windows CE, Reset
Device, and Start Flash.
e. Verify that the Network IP address in the Connection field is the address of the device you
intend to update.
f. Click Start.
To Next Page
Loading...
