2101510MNAH | NGC8200 AND PGC1000 USER MANUAL | 87
Figure 9-4: Enable security on terminal board (switch DOWN)
10. On the Station Setup tab, click Re-read. Verify that the security switch status is On (Figure
9-14). Enforcement of the security codes is in effect.
11. Click Close to close PCCU32 connection with device.
Figure 9-5: Security Switch Status: On
IMPORTANT NOTE: PCCU32 requires the security codes the next time it attempts
the analyzer.
12. Test security code enforcement: Click the Setup icon on the PCCU top menu bar.
13. Type the security code in the Level 1-2 Security Code field (Figure 9-6).
14. Click Close to exit setup.
15. Click Entry.
16. Verify connection is established.
To Next Page
Loading...
