ABB REC 561 - Page 207

ABB Network Partner AB
Synchronism and energizing
check for single circuit breaker
with voltage selection
Version 1.0-00
1MRK 580 152-XEN
Page 5 - 28
2 Connect the signals below to binary inputs and binary outputs. Apply
signals according to the table and verify that correct outsignals are
generated
.
VOLTAGE FROM BUS1 U5 VOLTAGE FROM BUS2 U4 BINARY INPUTS CB1OPEN CB1CLD CB2OPEN CB2CLD UB1FF UB2FF VTSU BINARY OUTPUTS AUTOOK MANOK VSUB1 VSUB2
10 1010000 1110
10 0110000 1110
10 0110100 0010
10 0110010 1110
10 0110001 0010
10 0101000 1110
10 1001000 0001
01 0110000 0010
01 0101000 0010
01 1001000 1101
01 1001100 1101
01 1001010 0001
01 1001001 0001
01 0101000 0010