ABB REC 561 - Remote Control

Apparatus control
ABB Network Partner AB
1MRK 580 150-XEN
Page 6 - 39
Version 1.0-00
4.2.4 Remote control The command signals from the remote-control gateway are transferred to
REC 561 via Single Command function blocks and can be arranged in a
way shown in Fig. 24. All or some of the events defined for the station
MMI can also be sent to the remote control gateway.
Fig. 24 Control commands from remote-control gateway
SingleCmdFunc
R_SEL_O
R_SEL_C
R_OPEN
R_CLOSE
COMCON
R_CANCEL
Apparatus 1



To other apparatus
in the bay
From remote-
control gateway
.
.
.
.
Defined as pulse outputs
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
OUT9
OUT10
OUT11
OUT12
OUT13
OUT14
OUT15
OUT16
(X80150-24)