Measurement of alternating
quantities
ABB Network Partner AB
1MRK 580 159-XEN
Page 7 - 25
Version 1.0-00
5 Appendix
5.1 Terminal diagram
Fig. 5 Simplified terminal diagram for the alternate analogue quan-
tity measuring
5.2 Signal list
DIrAnalog In_U1
DAxx-BLOCK
DAxx-HIALARM
DAxx-HIWARN
DAxx-LOWWARN
DAxx-LOWALARM
DAxx (Alternate quantity measuring unit No.1..15)
(x80159-5)
IN: DESCRIPTION:
DA01-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel U1, when active
DA02-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel U2, when active
DA03-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel U3, when active
DA04-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel U4, when active
DA05-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel U5, when active
DA06-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel I1, when active
DA07-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel I2, when active
DA08-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel I3, when active
DA09-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel I4, when active
DA10-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel I5, when active
DA11-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel U, when active
DA12-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel I, when active
DA13-
BLOCK
Blocks the reporting of new measured value by analogue
measuring channel P, when active
To Next Page
Loading...
