AO801/AO810/AO820 Section 3 Run-time Operation
100 3BSE027630-600 B
Channel parameters tab
The control looks the same for all modules but for the number of channels.
Channel area
Mark the Deactivate check box if the channel shall not be used.
Make the required choices in the Signal range and OSP control drop-down menus.
If the alternative “Set OSP value” is chosen, you can type your own value (0-100%)
in the OSP value text field.
Figure 43. AO801/AO810/AO820 - Configuration - Channel Parameters Tab
To Next Page
Loading...
