AI801/AI810/AI820/AI825 Section 3 Run-time Operation
60 3BSE027630-600 B
AI801/AI810/AI820/AI825
About DTM
See About DTM on page 39.
Identification
See Identification on page 40.
Dynamic Data
See AI801/AI810/AI815/AI830/AI835/AI845/AI890/AI893/AI895 Dynamic values
on page 151, and AI820/AI825 Dynamic values on page 152.
Diagnosis
See Diagnosis on page 41.
Observe
See Observe on page 44.
Configuration
This control is not available if the unit is used towards AC 800M. The
configuration data is then set via Control Builder Professional.
For configuration of the module, select the “Configuration” menu item. It shows the
user parameters for the module i.e. Filter time, Signal range and Linearization.
To Next Page
Loading...
